What are the common faults in hydraulic balers?

Hydraulic balers may have many problems in the process of packaging the items, and these problems may occur frequently, and any manufacturer''s equipment will appear. These are common problems of hydraulic balers, also known as hydraulic balers. Common problems, although these common problems are not a big problem, but it will affect normal production.

Therefore, it is a big problem if it is not treated in time and usefully. The common fault of the hydraulic baler is the first embodiment of Environmental Protection Equipment Co., Ltd. The answer is as follows: no vacuum. The hydraulic baler used for the first time assumes that the maximum vacuum is not possible. The reverse of the vacuum pump constitutes the inability to evacuate.

Assume that after using it for a period of time, it does not take vacuum. Then there may be a vacuum pump fault or a circuit board fault. There is also a possibility that the vacuum chamber is deformed, and the vacuum machine cover cannot be fully attracted to form a vacuum. Appeared, not sealed. Assuming that the hydraulic baler does not seal, first check the bag for signs of burns.

Suppose there is, it means that the heating temperature is not enough, only need to adjust the heating temperature. Assuming that the bag does not have a burnt mark, then the heating bar has no temperature at all, which may be caused by two cases, one is that the heating bar is cracked or burned, and the other is that the heating transformer is burned. Users only need to step by step and check them one by one.