Hydraulic baler operation process

With the increasing awareness of environmental protection, the hydraulic baler plays a big role. It can reuse some waste paper, and it is more and more popular with everyone. Our company''s hydraulic waste paper baler has been continuously researched and developed. Innovation, constantly following the development of some advanced foreign technology, advancing with the times, to create the most practical, most assured, most advanced hydraulic packaging machinery for domestic environmental protection.

Henan Hongyuan Machinery Equipment Co., Ltd. insists on perfecting and deepening quality management Keeping pace with the times The first-class quality of the foundry industry~ quality assurance, quality problems in one year warranty, replacement, return and bear the packaging and transportation costs of accessories. Welcome new and old customers to purchase ~ Let''s take a look at the operation process of the hydraulic waste paper baler:

1. This is mainly used for the packaging of waste paper, and the operator must operate according to the operating procedures.

2. Check the circuit for misconnection or leakage before starting the hydraulic pump.

3. If abnormality is found, stop the operation immediately and eliminate the cause.

4. Hydraulic fluid must be added to the specified oil level line (46# hydraulic oil) before use.

5. When packing, the operator must pay attention to safety, evenly spread the paper, and place the paper in place. The upper lid door should be closed to start packing.

6. When packing, the hydraulic handle should be quickly pushed to the specified position to prevent the hydraulic handle from being quickly pushed to the specified position when the valve is packed. When the package is taken, the hydraulic handle should be quickly pushed to the specified position and the hydraulic oil flow is not enough, resulting in the motor passing. The flow causes the motor to overcurrent. Blockage and insufficient hydraulic oil flow cause the motor to over-current.

7. When the cover cylinder handle is pulled to t