What should I pay attention to when the baler is working?

1. During the operation of the machine, it is forbidden to put the hand or the head into the frame. If the head or hand is inserted into the frame, it will cause damage to the body by the baler.

2. When we remove the upper panel, we must first cut off the power switch, unplug the power supply, and then repair and adjust the machine.

3. Regarding the heater, the heater will be burnt if it is directly touched by a hand at a high temperature (about 230 degrees). We have to cool down for a while after switching off the power supply before returning to normal temperature.

4. Pay attention to some matters when using electrical components. For example, when repairing and adjusting the metal baler, be sure to cut off the power switch and unplug the power plug. When the power is turned on, touch the electronic control box and the transformer will have an electric shock. Danger. In addition, the external insulation is damaged, and contact with the body can cause an electric shock accident, which is very dangerous.

5. The debris in the bin should be cleaned in time to avoid affecting the running-in production of the machine.

6, without learning, do not understand the machine structure, performance and operating procedures, you must not start the machine.

7. When the machine has a serious oil leakage or an abnormal phenomenon during work, stop the operation immediately to analyze the cause and eliminate the fault, and do not force the disease to run.

8. During the operation of the machine, no repair or contact with moving parts is allowed. It is strictly forbidden to press the material in the bin by hand or foot.

9. When adjusting the pump, valve and pressure gauge, it must be carried out by experienced technical workers. If it is found that the pressure gauge is faulty, it should be checked or updated immediately.